How to Write Like a Scientist - Lesson #1

Worksheet:
  1. Read
  2. Examine
  3. Write on paper
  4. Check

How to Write Like a Scientist - Lesson #1

How Scientists Describe Change

Right now, as you read this sentence, your body is changing. Your heart beats faster when you climb a flight of stairs and slows down again when you rest. Your breathing speeds up when you run for a bus. You notice changes like these every day, even when you are not thinking about them.

A runner wearing a heart rate monitor, next to a graph showing heart rate rising over time Heart rate monitor 160 110 60 Time running (minutes) Heart rate
Figure 1. When a runner speeds up, the heart rate rises. A heart rate monitor measures the change in beats per minute.

Many of these changes start inside your cells. Your muscle cells use oxygen and glucose to make ATP, the molecule that powers almost everything a cell does. When you exercise, your muscles need more ATP, so your heart and lungs work harder to deliver more oxygen.

A muscle cell with mitochondria. Oxygen and glucose enter the cell and ATP leaves the mitochondria. Oxygen Glucose ATP Mitochondria Muscle cell
Figure 2. Inside a muscle cell, mitochondria use oxygen and glucose to make ATP.

Scientists study changes like these, and they share what they find in writing. To make their writing clear, they name exactly what changed, describe how it changed using numbers, and explain what caused the change. A doctor, a coach and a biologist can all read the same sentence and understand exactly what happened.

In this lesson you will learn to write the same way. You will name variables, describe changes with numbers, connect two changes in one sentence, and explain causes and effects. You already notice the changes. This lesson gives you the scientific language to describe them.

Learning targetI can describe changes in scientific variables and explain how one change affects another.

Guiding question: How do scientists describe changes?

How this lesson works

How each part of this lesson works

  1. Read
    Learn the words.
  2. Examine
    Study a model or diagram.
  3. Write on paper
    Answer on your worksheet.
  4. Check
    Practice with new examples.

The six sections of your worksheet

Each section has its own color. The color at the top of the screen always tells you which section you are in.

Two colors mean the same thing everywhere in this lesson. Blue marks variable 1, the variable that changes first. Green marks variable 2, the variable that responds. You will see these colors in sentences, on graph axes and in table headings.

Press the Español button at the top of the screen to read the whole lesson in Spanish. Press it again to go back to English. The Glossary button lists every term in English and Spanish.

Keep your paper worksheet and a pencil next to you. When a screen says Write on paper, stop and write your answers on the worksheet before you press Next.

Each section of your worksheet starts with a step box that matches the steps at the top of this screen, and ends with a Write It box. The lesson tells you when to write in each one.

The Check screens give you practice with new examples. You can try each one as many times as you like, and the feedback will help you see what to change.

The top of every screen tells you which section, questions and worksheet pages you are working on. The lesson follows the six sections of your worksheet in order. Use the Previous and Next buttons at the bottom of the screen to move through the lesson.

The words scientists use to describe what they measure

Before you can describe a change, you need exact words for the things that change. Read each definition and its example. You will use these five words in Section 1 of your worksheet.

Variable
A variable is a factor that can change or be measured. The temperature of water, the time in minutes, and the number of bacteria on a plate are all variables.
Number
Number tells how many objects are present. When you count 12 molecules in a container, you are describing the number of molecules.
Amount
Amount tells how much of something is present, usually something you measure instead of count. The amount of water in a beaker is 250 milliliters, and the amount of salt on a balance is 5 grams.
Rate
Rate describes how quickly a process occurs. Scientists write a rate as a change per unit of time, such as ATP produced per minute. If a plant releases 30 bubbles of oxygen in 5 minutes, its rate is 6 bubbles per minute. The word "per" means "for each."
Concentration
Concentration describes the amount of a substance in a given volume. Twelve molecules in 1 liter of water is a higher concentration than 4 molecules in 1 liter of water, because more molecules share the same space.

Notice that rate and concentration both compare two measurements. Rate compares a change to time. Concentration compares a quantity of a substance to volume.

Examine: concentration in two containers

Container A and Container B hold the same volume of liquid, 1.0 liter each. Container A has 4 molecules and Container B has 12 molecules. Because the volume is the same, the container with more molecules has the higher concentration.

Two containers of liquid with particlesContainer A and Container B are drawn side by side. The particle counts and volumes are described in the text below the diagram.
Each dot stands for one molecule of a dissolved substance. The shaded area shows the liquid.

Try these

First, keep the volume at 1.0 liter and move the molecule slider. Watch how the concentration of Container B changes while the volume stays the same.

Then turn on the volume control. Set Container B to 8 molecules and 2.0 liters. Compare its concentration with Container A, and think about why two containers with different numbers of molecules can still have the same concentration.

Examine: rate per minute

A student places a water plant under a lamp and counts the oxygen bubbles it releases. In this instructional example, the plant releases 6 bubbles every minute. Move the slider to change how long the student counts.

Rows of bubbles, one row for each minute of counting
Each row shows the bubbles counted during one minute.

The total number of bubbles grows as the minutes pass, but the rate stays the same. Total and rate are different measurements. To find a rate, divide the total change by the time it took.

Pause and write on paper

Your worksheet has the same steps in the box under the Section 1 heading. You are on step 2, Write on paper.

Complete Section 1, Questions 1 to 5

Turn to Section 1 of your worksheet, which starts on page 1. Read Section 1 and study the two containers. Then answer questions 1 through 5 in the Check Your Understanding box by writing the vocabulary word that matches each definition.

Before you move on, reread each definition and the word you wrote next to it. Check your spelling, and make sure you used "number" for things you count and "amount" for things you measure.

Activity

Sort the measurements

Number or amount?

Remember: number is for things you count, and amount is for things you measure. Choose one answer for each measurement.

25 seeds in a bag
250 mL of water
12 molecules in a container
5 grams of salt
8 red blood cells in a sample
2 liters of oxygen gas

Rate or concentration?

Both use the word per. Look at what comes after per. Time means rate. Volume means concentration.

6 bubbles per minute
4 molecules per liter
75 beats per minute
20 mg of sugar per mL
3 cm of growth per day
8 mg of oxygen per liter of water
Check Your Understanding

Practice with new examples

These questions use new examples. They are not the worksheet questions.

1. Beaker X has 10 salt particles in 0.5 liter of water. Beaker Y has 10 salt particles in 1.0 liter of water. Which statement is correct?
2. A student counts 150 heartbeats in 2 minutes. What is the student's heart rate?
3. A student writes, "There are 25 seeds in the bag." Which word best names what the student described?
Now write it on paper: Write It 1

Turn to the Write It 1 box at the end of Section 1 on your worksheet, page 2. The box describes two cups of sugar water. Use the sentence starter in the box. Write one complete sentence, then reread it and check that it has every part you practiced.

Finding the two variables in an investigation

A relationship is a connection between two or more variables. Before you can describe a relationship, you have to find the variables. Scientists look in three places.

1. The description of the investigation

Many investigations are written as "how [variable 1] affects [variable 2]." Read this instructional example.

Scientists investigated how the time spent exercisingVariable 1 affects heart rate.Variable 2

The word "affects" sits between the two variables. The variable before it is the one the scientists changed, and the variable after it is the one they measured. Some descriptions use other wording. "Scientists measured heart rate in people who exercised for different amounts of time" names the same two variables in a different order, so read the whole sentence before you decide. When a description says something changed "over time," time is one of the variables.

2. The labels on a graph

On a graph, read the labels on both axes. The x-axis label usually names variable 1, and the y-axis label usually names variable 2.

3. The headings in a data table

In a data table, read the column headings. The first column usually names variable 1, and the next column names variable 2.

Write each variable as something that can be measured, with words like rate, amount, number or concentration when they belong. "Heart rate" is a variable. "The heart" is not.

Examine: a relationship between two variables

A relationship always connects two variables. When scientists describe a relationship, they name both variables and tell how a change in the first one goes along with a change in the second one.

In this instructional example, warmer water dissolves more sugar. The arrow shows the order we read the relationship, from variable 1 to variable 2.

The same skill on a graph and a table

Here is the exercise investigation as a graph. Find the two variables by reading the axis labels, then check them against the table.

Heart Rate During Exercise
Time spent exercising (minutes)Heart rate (beats per minute)
070
5110
10135
15150

The x-axis label and the first column heading both say "Time spent exercising (minutes)," so that is variable 1. The y-axis label and the second column heading both say "Heart rate (beats per minute)," so that is variable 2. The graph and the table represent the relationship between the time spent exercising and heart rate.

Each box names something you could measure, and each one has a unit. The word "sugar" by itself is not a variable. "The amount of sugar that dissolves" is a variable, because it is a quantity that can change and be measured in grams.

Pause and write on paper

Your worksheet has the same steps in the box under the Section 2 heading. You are on step 2, Write on paper.

Complete Section 2, Questions 6 to 11

Turn to Section 2 of your worksheet, which starts on page 3, and read it. Question 6 asks for a vocabulary word. Questions 7 through 10 ask you to name the two variables in each investigation. Question 11 asks you to read the axis labels on a graph.

For each investigation, look for the word "affects" or the words "over time," and read the whole sentence before you decide which variable is which. Write the full name of each variable, not one word.

Activity

Tag the variables

Press a phrase once to tag it Variable 1. Press it again to tag it Variable 2. Press a third time to clear it. Tag exactly two phrases in each sentence, then press Check tags.

1.

2.

3.

Check Your Understanding

Practice with new examples

These questions use new examples. They are not the worksheet questions.

1. Scientists investigated how pH affects the activity of the enzyme catalase. Which pair names the two variables?
2. A graph has "Days after planting" on the x-axis and "Plant height (cm)" on the y-axis. Which variable is variable 1?
3. A data table has two column headings: "Number of leaves" and "Water lost (mL)." What relationship does the table represent?
4. Which statement describes a relationship?
Now write it on paper: Write It 2

Turn to the Write It 2 box at the end of Section 2 on your worksheet, page 4. Use the fertilizer investigation in the box. Write one complete sentence, then reread it and check that it has every part you practiced.

The words that describe change

Once you can name a variable, the next step is describing what it did. These six words let you describe a change in a way another scientist could check against the data.

Increase
When a variable increases, its value becomes greater. If the height of a seedling goes from 2 centimeters to 5 centimeters, the height increased.
Decrease
When a variable decreases, its value becomes smaller. If the mass of an ice cube goes from 20 grams to 12 grams as it melts, the mass decreased.
Remain stable
When a variable remains stable, its value stays relatively constant. Your body temperature remains stable near 37 °C during a normal day, even though it moves up and down by small amounts.
Pattern
A pattern is a repeated or consistent trend in information. To find the pattern, look at the whole graph from left to right instead of focusing on one point.
Initial value
The initial value is the first measured value of a variable, the value at the start of the data.
Final value
The final value is the last measured value of a variable, the value at the end of the data.

A complete description of change names the variable, states the pattern, and gives the initial value and the final value with their units.

Examine: three patterns on a graph

Every line graph has a variable on the x-axis and a variable on the y-axis. Read each graph from left to right to find its pattern. Press Play to watch each line being drawn.

In the first graph, the line rises from left to right, so the variable increases. In the second graph, the line falls, so the variable decreases. In the third graph, the line stays level, so the variable remains stable.

Examine: a model sentence with initial and final values

A student measured the temperature of pond water every two hours. Study the graph, then read how the student turned it into one complete sentence.

The temperature of the pond waterVariable increasedPattern from 12 °C at 8:00 a.m.Initial value to 19 °C at 2:00 p.m.Final value

How the student built the sentence

  1. The student named the variable exactly, using the label on the y-axis.
  2. The student read the whole line from left to right and named the pattern.
  3. The student circled the first point and wrote the initial value with its unit and time.
  4. The student circled the last point and wrote the final value with its unit and time.

Compare that sentence with "It went up." The short version leaves out what went up, where it started and where it ended, so a reader cannot check it against the data.

Pause and write on paper

Your worksheet has the same steps in the box under the Section 3 heading. You are on step 2, Write on paper.

Complete Section 3, Questions 12 to 16

Turn to Section 3 of your worksheet, which starts on page 5. Questions 12, 13 and 14 ask for the words that describe change. Question 15 uses the glucose graph, and question 16 asks you to describe a pattern. You will write your answers on paper, so this screen does not describe the graph or tell you what it shows.

  1. Read the title and both axis labels. Write down the units on the y-axis.
  2. For question 15, put your finger on the first data point. Circle the initial value on your paper.
  3. Put your finger on the last data point. Circle the final value on your paper.
  4. Look at the whole line from left to right and decide which pattern it shows.
  5. Answer questions 12 through 16. For question 15, use the model sentence from the last screen as your guide, with the variable, values and units from the glucose graph.
Activity

Build a description of change

Put the parts in order

A student measured an ice cube as it melted. Put the four parts of the description in the correct order.

  1. to 12 g at 10 minutes.
  2. The mass of the ice cube
  3. from 20 g at 0 minutes
  4. decreased

Which pattern?

Read each set of measurements from first to last and choose its pattern.

Height of a plant: 2 cm, 4 cm, 7 cm, 11 cm
Water in a puddle: 500 mL, 380 mL, 210 mL, 90 mL
Resting heart rate: 68, 70, 69, 68 beats per minute
Mass of a growing mushroom: 3 g, 5 g, 9 g, 14 g
Body temperature: 37.0, 37.1, 36.9, 37.0 °C
Check Your Understanding

This graph is a new example. A student turned off the air pump in a fish tank and measured the dissolved oxygen in the water every hour.

1. Which pattern does the dissolved oxygen show?
2. What is the initial value of the dissolved oxygen?
3. Which sentence is the most complete description of the change?
Now write it on paper: Write It 3

Turn to the Write It 3 box at the end of Section 3 on your worksheet, page 6. The box shows the same dissolved oxygen data as the graph on this screen. Write one complete sentence, then reread it and check that it has every part you practiced.

A good place to stop

Sections 1, 2 and 3 are complete.You can now name a variable, find the two variables in an investigation, and describe a change with its initial and final values.

If your class period is ending, this is a good place to stop. Your progress is saved in this browser, so the lesson will open on this screen the next time you use this device. Keep your worksheet with you so you can pick up at Section 4.

If you have time, keep going. Section 4 teaches you to write one sentence about how two variables change together.

A sentence structure for relationships

In Section 3 you described how one variable changed. A relationship sentence describes how two variables change together. Scientists use this structure:

As [variable 1] [change], [variable 2] [change].

The sentence has four parts. Each part is marked below with its own color, its own underline style and a label.

As the temperature of the waterVariable 1 increases,Change 1 the amount of sugar that dissolvesVariable 2 increases.Change 2

Variable 1
Variable 1 is usually the variable on the x-axis of a graph or in the first column of a table.
Change 1
Change 1 tells how variable 1 changes, using a word such as increases or decreases.
Variable 2
Variable 2 is usually the variable on the y-axis or in the second column. It is the variable you watch respond.
Change 2
Change 2 tells how variable 2 changes at the same time, using increases, decreases or remains stable.

Name each variable as a measurable quantity. "As the temperature increases" is stronger than "As it gets hotter," because the reader knows exactly what was measured.

Examine: direct, inverse and stable relationships

Relationships come in three common types. Study each graph and read the sentence that describes it.

Direct relationship
In a direct relationship, both variables change in the same direction. As the temperature of the water increases, the amount of sugar that dissolves increases.
Inverse relationship
In an inverse relationship, the variables change in opposite directions. As the amount of salt dissolved in water increases, the freezing point of the water decreases.
Stable relationship
When variable 2 does not respond to changes in variable 1, variable 2 remains stable. As the volume of a pure water sample increases, the density of the water remains stable.

A relationship is not proof of a cause

Two variables can change together even when one does not cause the other. Ice cream sales and sunburn cases both increase during the summer, but ice cream does not cause sunburns. Hot, sunny weather affects both of them.

A relationship sentence tells what the data show. To claim that one variable causes a change in another, scientists need more evidence, such as a controlled experiment that changes only one variable at a time.

Pause and write on paper

Your worksheet has the same steps in the box under the Section 4 heading. You are on step 2, Write on paper.

Complete Section 4, Questions 17 to 20

Turn to Section 4 of your worksheet, which starts on page 7, and read it. Follow the directions under the example: underline the two variables and circle the words that describe the changes. Then answer questions 17 through 20. Questions 17 and 18 ask you to fill in change words, question 19 uses a data table, and question 20 uses a model of a cell. Use the structure "As [variable 1] [change], [variable 2] [change]."

After you write each sentence, check its four parts. Did you name both variables as measurable quantities? Did you give a change word for each one? Did you describe only what the data show, without claiming that one variable causes the other?

Activity

Direct, inverse or stable?

Sort the relationships

Read each relationship sentence and choose its type.

As exercise time increases, heart rate increases.
As the altitude of a plane increases, the air temperature outside decreases.
As the volume of a gold sample increases, its density remains stable.
As the amount of sunlight increases, the rate of photosynthesis increases.
As water temperature increases, the amount of dissolved oxygen decreases.
Check Your Understanding

Put the sentence in order

The parts of a relationship sentence are out of order. Use the Move up and Move down buttons to put them in the correct order, then press Check order. In this instructional example, a student measured the rate of photosynthesis in a plant under low to moderate light.

  1. the rate of photosynthesis
  2. increases.
  3. As
  4. increases,
  5. light intensity

Now an inverse relationship

In this instructional example, an ecologist tracked a predator and its prey. Put this sentence in order.

  1. decreases.
  2. the number of prey
  3. As
  4. increases,
  5. the number of predators

Check Your Understanding

Read a relationship from a table

A hiker records the air pressure at different altitudes on a mountain.

Air Pressure at Different Altitudes
Altitude (m)Air pressure (kPa)
0101
1,00090
2,00080
3,00070
1. What type of relationship do the data show?
2. Which sentence correctly describes the relationship?
Now write it on paper: Write It 4

Turn to the Write It 4 box at the end of Section 4 on your worksheet, page 8. The box shows the same altitude table as this screen. Write one complete sentence, then reread it and check that it has every part you practiced.

Cause, effect, affect and result

A relationship sentence tells what changed together. A cause and effect sentence goes one step further and explains how one change produces another. Use it only when you have evidence for the cause.

Cause
A cause is an event or condition that produces a change. When the temperature of a puddle increases and more water evaporates, the increase in temperature is the cause.
Effect
An effect is the change produced by a specific cause. Faster evaporation is the effect of the increase in temperature. "Effect" is usually a noun, so you can put "the" or "an" in front of it.
Affect
"Affect" is usually a verb that means "to influence or produce a change." Temperature affects the rate of evaporation. If you can replace the word with "changes," use "affects."
Result
A result is the outcome at the end of a process or investigation. A dry, empty puddle at the end of a hot afternoon is one result. The phrase "results in" connects a cause to its effect.

Two sentence structures for cause and effect

[cause] results in / leads to [effect].

An increase in temperatureCause leads toConnector an increase in the rate of evaporation.Effect

[effect] because [cause].

The rate of evaporation increasedEffect becauseConnector the temperature increased.Cause

Both sentences say the same thing. The first one starts with the cause, and the second one starts with the effect. Notice that the word "because" always comes right before the cause.

Examine: a causal chain in your cells

Sometimes one cause leads to an effect, and that effect becomes the cause of the next change. Scientists call this a causal chain. Press Play to watch what happens in a muscle cell when oxygen becomes limited, or use Next step to go at your own pace.

Start: the muscle cell has plenty of oxygen. All three variables are high.

What oxygen-limited conditions mean

Cells make most of their ATP through aerobic respiration, which takes place in the mitochondria and uses glucose and oxygen. Oxygen is needed at the final step of the process, where it accepts electrons and combines with hydrogen to form water.

Oxygen-limited conditions happen when cells use oxygen faster than the blood can deliver it, as in a muscle during intense exercise. With less oxygen, the final step slows, so the whole process of aerobic respiration slows. Aerobic respiration can make roughly 30 to 38 ATP from one glucose molecule, so when it slows, the cell makes much less ATP this way. The cell can rely more on anaerobic pathways, which make only 2 ATP per glucose molecule.

Writing a claim with If and then

Scientists do more than describe data. They also make claims. You will use this skill on the last page of your worksheet.

Claim
A claim is a statement that answers a scientific question. A claim about two variables tells what happens to one variable when the other variable changes. Data can support a claim.

Scientists often write a claim with the words If and then:

If [variable 1] [change], then [variable 2] [change].

If the temperature of the waterVariable 1 increases,Change 1 then the rate of evaporationVariable 2 increases.Change 2

A claim uses the same four parts as an As sentence. The difference is the job the sentence does. An As sentence describes what the data show. An If and then sentence states a claim that the data can support.

Support the claim with numbers

A claim is stronger when you add numbers from the data. After the claim, write a second sentence with the initial and final values of both variables.

Claim: If the temperature of the water increases, then the rate of evaporation increases.
Numbers from the data: When the temperature increased from 20 °C to 40 °C, the rate of evaporation increased from 2 mL per hour to 6 mL per hour.

Pause and write on paper

Your worksheet has the same steps in the box under the Section 5 heading. You are on step 2, Write on paper.

Complete Section 5, Questions 21 to 28

Turn to Section 5 of your worksheet, which starts on page 9, and read it. Questions 21 through 24 ask for vocabulary words. Questions 25 through 28 ask you to write about causes and effects. Use the structures you learned: "[cause] results in / leads to [effect]" and "[effect] because [cause]."

Before you move on, check each sentence. Does the cause come before "results in" or "leads to"? Does the cause come after "because"? Did you use "affect" as a verb and "effect" as a noun?

Activity

Choose the connector

Results in or because?

Use results in when the cause comes first. Use because when the effect comes first. Choose the connector that completes each sentence.

Less oxygen reaching muscle cells ______ less aerobic ATP production.
The plant wilted ______ the soil was dry.
An increase in temperature ______ faster evaporation.
The ice melted ______ the temperature rose above 0 °C.
Cutting down the trees on a hillside ______ more soil erosion.
Fewer bees visited the flowers ______ a pesticide was sprayed nearby.
Activity

Build a claim

Put the claim in order

A student wants to write a claim about light and plants. Put the parts in the correct order.

  1. then
  2. increases.
  3. the amount of sunlight
  4. If
  5. the rate of photosynthesis
  6. increases,

Complete claim or missing a part?

A complete claim has If, then, two variables and a change for each variable.

If the amount of light increases, then the rate of photosynthesis increases.
If light increases, then plants.
If the temperature of a pond increases, then the amount of dissolved oxygen decreases.
The plants grow more.
If the number of predators increases, then the number of prey.
Check Your Understanding

Sequence a causal chain

This is a new example about a farm field during a dry season. Put the events in order so that each one causes the next. Use the Move up and Move down buttons, then press Check order.

  1. The plant roots absorb less water.
  2. The growth of the plants decreases.
  3. The amount of rainfall decreases.
  4. The moisture in the soil decreases.

Check Your Understanding

Complete the explanation

Choose the word or phrase that correctly completes each sentence about the farm field. Then press Check answers.

1. The amount of rainfall the moisture in the soil.

2. One of less rainfall is drier soil.

3. A decrease in soil moisture a decrease in the water the roots absorb.

4. The growth of the plants decreased the roots absorbed less water.

5. Smaller plants are one of the dry season.

Now write it on paper: Write It 5

Turn to the Write It 5 box at the end of Section 5 on your worksheet, page 11. The box describes the same farm field you just put in order. Write one complete sentence, then reread it and check that it has every part you practiced.

Independent assessment on paper

Your worksheet has the same steps in the box under the Section 6 heading. You are on step 2, Write on paper.

Complete Section 6, Questions 29 to 32

Section 6 is your chance to show what you can do on your own. Turn to Section 6 of your worksheet, which starts on page 12. Read "Maintaining Cellular Functions," study the data table, and then answer questions 29, 30, 31 and 32.

  1. Work independently and write in complete sentences.
  2. Base your answers on the reading, the table and your knowledge of biology.
  3. Question 29 has two parts, a and b. Answer both.
  4. For question 32, write a claim with If and then, and support it with numbers from both columns of the table.
  5. Use the vocabulary and sentence structures from this lesson.
  6. When you finish, reread your answers and then turn your worksheet in to your teacher.
Optional Digital Exit Check

This optional check uses new examples. Try it after you turn in your worksheet.

1. Cup A has 2 drops of food coloring in 200 mL of water. Cup B has 2 drops of food coloring in 100 mL of water. Which cup has the higher concentration of food coloring?
2. A seedling was 3 cm tall on Day 1 and 9 cm tall on Day 7. Which sentence describes the change most completely?
3. "As the mass of a sample of pure iron increases, the density of the iron remains stable." What type of relationship does this sentence describe?
4. Which sentence correctly uses the structure "[cause] leads to [effect]"?

Your progress

Here is everything you have finished so far. Paper work and practice checks are listed separately.

If you missed a digital check, use the section menu at the top of the screen to go back to that part of the lesson and try again.